The Raspberry Pi is an amazing little computer that fits perfectly in the palm of your hand, yet it’s able to pack enough power to run a VPN, your home media center and a lot more. Before you can do anything good, however, you will need to configure the Raspberry Pi and install an operating system. Here’s a simple guide on how to do that.
A Raspberry Pi Defined
It’s a very capable mini computer that is small enough to fit in your pocket. For about $30-45, you will get a caseless computer with an HDMI and analog composite video output. You can add up to two different USB devices and connect it to the internet via ethernet. The Raspberry Pi is inexpensive and powerful thus allowing you to create a home media center, VPN server or internet radio on the cheap. That said, set up equipment and a lot of other parts are required to get it ready.
What You Will Need
The Raspberry Pi may be a small computer on its own, but you will still need a couple of other things to make it work.
A Raspberry Pi
m An HDMI, or a video-capable connecting to a monitor or a television.
In this guide we will be working with an HDMI capable and a monitor because a monitor offers built-in sound and a better resolution.
A 4GB SD card Class 4+ and a card reader
A majority of SD cards will work, but some SD cards are not compatible and will therefore cause some issues. .
A USB mouse and keyboard: Any standard USB mouse or keyboard will do the job. Wireless peripherals will also work, but you will have to unplug them and then plug them back in after the Raspberry Pi boots.
An ethernet cable: Any ethernet cable will do. You will only need this cable to connect to your network,thus gain internet access.
A quality, USB power supply that can be able to provide at least
700 milliAmps at 5V.
A 3.5mm audio cable:
You will only need this if you are using analog video and you want to connect your Raspberry Pi to external speakers or internal ones on your monitor or television.
You can find most of these items pretty much anywhere, i.e online shops, stores, e.t.c
How to Setup Your Raspberry Pi
You can use your Raspberry Pi for a couple of different things–some that may require special operating systems, but first off, it’s a good idea to understand the Pi by installing Raspbian, which is a Raspberry Pi-focused version of Linux.
1. Prepare Your SD Card
The first thing you need to do is to prepare your SD card for the Pi. This will involve formatting the SD card properly and putting Raspbian, which is the standard Raspberry Pi operating system, on it. The steps will vary depending on the operating system, but in this article, we are going to discuss how to setup the Pi on Windows.
2. Setup on Windows
1. Download the most recent version of Raspbian and then unzip the .img file inside. (It’s about 500MB thus it may take a some time to download.)
2. Download Win32 Disk Imager and then unzip the application (it’s a .exe file) inside.
3. Insert your microSD card into the Windows PC using a card reader.
4. Open the Win32 Disk Imager.exe, you just downloaded by double-clicking on it. If you’re running on Windows 7, 8 or 10 right click on the application and select “Run as Administrator” instead.
5. If the SD card is not automatically detected by the application, just click on the dropdown menu at the top right and choose it from the list.
6. In the img file section of your application, click on the little folder icon and then choose the Raspbian .img file that you just downloaded.
7. Click on the Write button and wait for the Win32 Disk Imager to do its thing. When it completes, you can now safely eject the SD card and insert it into your Raspberry Pi. You are ready to go!!
To Know More About Raspberry pi Reference Visit us…
Source : Click Here
No comments:
Post a Comment